ASA Composite Tile Source Factory for Renovation of Anti corrosion Resin Tile and New Plastic Tile Engineering in Datian Buildin

Traditional tile shape, glazed tile shape

Guangzhou red, yellow, treasure blue, jujube red, gray, blue gray, dark green, brick red, transparent, white

Plant renovation, self built house surface, rural self built house, old house renovation, flat to slope project, large roof project, hotel resort, antique buildings,

Normal service life of 20-50 years, quality product warranty period of 25-35 years, far Ultra traditional tile materials.

The weight per square meter is about 2.5-4 kilograms, which is only one-third of traditional tile materials, making it easy to transport and install.

Excellent impact resistance, with a 1kg steel ball falling freely from a height of 3 meters without cracks, and maintaining toughness even in low temperature environments (-30 ℃).

Resistant to acid, alkali, and salt corrosion, with no chemical reaction after soaking in acid solution or salt spray environment below 60% for 24 hours, suitable for corrosive scenarios such as chemical plants and coastal areas.

The thermal conductivity coefficient is 0.325 W/m · K, which is only 1/310 of that of clay tiles and 1/5 of that of cement tiles, effectively reducing indoor temperature.

The total width is 1050 millimeters, effectively covering a width of 960 millimeters and reducing the number of seams.

Under rainstorm or strong wind noise, the sound absorption effect is significant, creating a quiet indoor environment.

The wave spacing is 160 millimeters, the wave height is 30 millimeters, and the pitch is 219 millimeters. The three-dimensional design enhances drainage and wind resistance performance.

Meets the B1 level flame retardant standard, does not spread in case of fire, and delays the spread of fire.

Customized according to pitch multiples to meet different roof size requirements.

The material does not contain conductive components and remains intact in case of accidental discharge, ensuring electrical safety.

When the support spacing is 660mm, it can carry 150-180 kilograms of heavy objects without damage and is suitable for snow or heavy object coverage scenarios.

Using high weather resistance engineering as the core raw material, supplemented with anti UV agents, fillers and other additives, it is extruded or laminated at high temperature.

Usually 2.5-3 millimeters, some products can reach up to 3.5 millimeters to enhance durability.

The dense structure does not absorb water, and the surface is designed with a lotus leaf like hydrophobic design, which can be washed away by rainwater and eliminate the risk of leakage.

The surface ASA resin layer blocks ultraviolet rays, preventing material pulverization or cracking, and maintains stable physical properties even after long-term exposure.