Overview
Product Details
Related Product Recommended
PVC Pipe Making Machine/PVC Hose/Fiber Reinforced Hose Production Line
Model | FST45 | FST55 | FST65 | FST75 |
Extruder | SJ45/30 | SJ55/30 | SJ65/28 | SJ65/29 |
Diameter Range (mm) | ∅6-∅16 | ∅8-∅25 | ∅12-∅50 | ∅20-∅50 |
Output (kg/h) | 20-40 | 30-60 | 40-80 | 60-110 |
Installed Power (kw) | 35 | 42 | 50 | 65 |
PVC Pipe Making Machine/PVC Hose/ Fiber Reinforced Hose Production Line
Which is mainly used in the manufacture of the UPVC and PVC pipes with various
tube diameters and wall thickness such as the agricultural and constructional plumbing,
water supply and drain etc.
This set is composed of conical twin-screw extrude, vacuum calibration tank, haul-off machine, cutter, stacker etc.
The screw extruder and traction machine adopt imported AC frequency control device.
The vacuum pump and traction motor both adopt advanced products.
The haul-off machine has many models, such as two-claw, three-claw, four-claw, six-claw etc.
It may choose visual blade or cutting type.The unit is of reliable performance and high production efficiency.
Our machine can produce the PVC pipe with diameter from 16mm to 800mm
Processing Flow of PVC Pipe Making Machine/PVC Hose/ Fiber Reinforced Hose Production Line :
PVC powder + additive → spring feeding → twin screw extruder → mould and calibrator→ vacuum forming machine → haul off machine → cutting machine → discharging rack
PVC Pipe Making Machine/PVC Hose/Fiber Reinforced Hose Production Line Photos
FEEDER
Feeding machine is also called plastic feeding machine. Standard material is a necessary product in waste plastic production line. The feeding machine is also divided into single type automatic vacuum feeding machine and split type high-power automatic vacuum feeding machine.
ZJF100 | 1.1KW | φ30mm | 200kg/hr |
ZJF300 | 1.1KW | φ36mm | 300kg/hr |
ZJF450 | 1.5KW | φ45mm | 450kg/hr |
ZJF700 | 2.2KW | φ59mm | 700kg/hr |
EXTRUDER
Extruder is one of the types of plastic machinery, originated in the 18th century.
According to the direction of material flow and the angle of screw center line, the extruder head can be divided into right angle head and oblique angle head.
Screw extruder relies on the pressure and shear force produced by screw rotation, which can make the material fully plasticized and evenly mixed, and then molded by die. Plastic extruders can be classified into twin-screw extruder, single screw extruder, rare multi-screw extruder and non screw extruder.
1.Main technical parameters | ||
Model | SJSZ-65/132 | |
Screw diameter | Φ65/132mm, conical screw structure | |
Screw speed | 0-36r/min | |
Driving motor | 37KW | |
Speed control mode | Frequency control | |
Central height | 1000mm | |
Screw structure | Barrier screw | |
Barrel structure | Slotted feeder barrel, barrel heating section: 4 sections (using cast aluminum heating ring),22kw | |
Barrel cooling mode | Air cooling,cooling fan 0.25kw,3只 | |
Transmission structure | Horizontal reducer, distribution box | |
2.Main configuration and electrical parts | ||
Screw brand | Zhoushan Mulong Screw | |
Screw and barrel material | 38CrMoAlA(Nitriding treatment HV≥700-940) | |
Gear distribution box | Jiangyin gear box products | |
Motor | Siemens Bede motor | |
Contactor | Schneider | |
Frequency converter | Jiale inverter | |
Temperature control meter | OMRON |
DIE/MOULD
40Cr/42CrMo
VACUUM SIZING BOX
1.Main technical parameters | ||
Total length | 6000mm | |
Vacuum pump power | 4KW | |
Pump power | 4KWx2台 | |
Central height | 1000mm | |
Cooling form | Spray forced cooling | |
Control mode | Manual control | |
Move back and forth | Motor operation; moving distance: ±600mm | |
Spray point | Four | |
2.Main configuration | ||
Origin of water pump | Ningbo | |
Origin of vacuum pump | Ningbo | |
Nozzle material | Nylon PA66 | |
Cabinet material | Stainless steel |
HAUL-OFF UNIT
1.Main technical parameters | ||
Traction range | Φ50-110mm Maximum traction diameter | |
Traction speed | 0.5-6M/min | |
Maximum traction | 2000N | |
Main motor power | 1.5KW*2 Ssets | |
Effective traction length of track | 1800mm | |
Speed control mode | Frequency control | |
Central height | 1000mm | |
2.Main configuration | ||
Motor | Changzhou motor | |
Frequency converter | Jiale brand inverter |
1. Main technical parameters | ||
Cutting saw blade diameter | Φ130 (The material is alloy steel ) | |
Work line speed of products | <10M/min | |
Cutting motor power | 3KW | |
Clamping mode and cutting feed mode | Feed wire | |
Working procedure | Linkage with main engine | |
Central height | 1000mm | |
2. Main configuration | ||
Electric machinery | Changzhou electric machinery Co., Ltd | |
Saw blade | Alloy hacksaw blade | |
Pneumatic components | 2-position 5-way solenoid valve |
PVC Pipe Making Machine/PVC Hose/ Fiber Reinforced Hose Production Line from Zhangjiagang Huade Machinery
Trading Area
Global