Overview
Product Details
APPLICATIONS: Ledeburitic 12% chromium steel, with wolfram addition (therefore better hardenability) highest wear resistance, good dimensional stability, high compressive strength, with a good toughness. roll- or table knives, drawing punch, straightening rolls, blanking dies in the paper- and plastic industry, molds in the ceramics industry, cold shear blades for thin sheets up to 2 mm thickness Characteristics: annealed max. 250 HB Machinability: 3 (1 = very bad - 10 = good) Chemical composition: 1.2436 C Si Mn P S Cr min. 2.00 0.10 0.30 11.00 max. 2.30 0.40 0.60 0.03 0.03 13.00 Production: Round and Flat Size according to customer's requirement Benefit of sawn cuts: The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting. Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material. This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.