Overview
Product Details
Dual H-Bridge Brushed Motor Driver Board Brush Motor Controller 16A 5V-48V 12V 24V 48V High Power Motor Drive Control
Parameters:Model: ZS-H1BOutput channel: 2-wayWorking voltage: 5-36V2-Channel rated current: 16A Max.1-Channel rated current: 8A Max.Each channel output rated power: (12V power supply)96W; (36V power supply)288WControl signal voltage: 3-5VEach channel control signal current: 2-10MASupport PWM frequency range: 2-20KSupport PWM duty ratio range: 0-99%Min. PWM effective pulse width: 10USWorking temperature:-10°C-80°CSize: 69*50*15mmWeight: 26g Notes:1. We recommend adding the fuses, as without fuses on the power supply circuit of the motherboard. The reversed connection will cause some of the chip permanent damage.2. In the normal operation, the motor output has no over-current . Please do not man-made short-circuit, because the module power current is large. Once short-circuit, has the possibility of burning circuit and tube. Please use low current low-voltage testing in the first wiring test; then connect the larger current and voltage. Due to the bare board module sold, please attention wiring thread insulation and prohibited strong voltage touch onboard parts.3. Do not connect the drive motor which has obviously inconsistent voltage, current, power, to avoid the unreasonable damage.4. When switching between positive and negative rotation, it is better to save buffer time on software control, so as to avoid the impact of powerful reverse electromotive force on the MOS tube on the board and reduce the risk of damage. Package Includes:1 x Brush Motor Controller