Overview
Product Details
Leak Testing Machine
Hepa filters are the key point of high-efficiency cleaning air filtration system. The manufacturer must test each hepa filter before packaging and delivery. So far, the most popular test methods for hepa filter are photometer scanning and counter scanning. These two methods are popular, but high labor-consuming and in-efficient. Besides, filter in certain structure such as W-type can’t be tested. Under this condition, the market call on an easy-operation, high-efficiency and reliable tester for leaking.The machine is a new type leaking tester ,which is self developed and produced according to the theory that the mist can be filtered by hepa filter in the basic of mist leaking test by Xinxiang North Filter Co.,Ltd, complying with the demand of the market.
Performance Characteristics1. Fuming particle diameter is between 0.3 ~ 0.5 um, particle arranged evenly, and in line with the dust particle size of the counting scanning method, able to meet the requirements of HEPA filters leaking test.2. For a wide range of various types of HEPA filters with and without separators to detect.3. High detection efficiency, only two seconds for single filter detection, cut detection time short, and reduce the cost of production.4. Meet environmental requirements, the device emitted mist without any harm to the operator. The detection process has no mist emission outwards, no impact on the surrounding environment.5. Electrical control system uses PLC control, easy to operate with high reliability.6. Cheap raw material consumables, negligible testing cost. It is currently the most cost-effective HEPA filter tester in domestic.
Components
1.Fan power parts.2.Efficient smoke machine spray parts.3.Smoke conveying parts.4.Installed filter seal parts.5.Discharge and recycle parts.6.Electrical control parts.
Supply Voltage: Single phase AC 220V±5﹪ Design Power 2KWSupply Frequency: 50Hz/60Hz Suited Filter Level H10-H14 panel filterSmoke Oil Grain Size: 0.5um,(σ＜1.5)
Rated Airflow: 2100 m³/hAnti-electric Shock Rate: One Grade
Machine Material: Stainless steelMachine Size: 2080(L)×920(W) ×2020(H)
Machine Weight: 400KGCapacity of Oil Tank: 2.5LMax Test Filter Size: 1200mm×700mm×300mm
Min Test Filter Size: 300mm×300mmMax Wind Pressure: 780 Pa
Max Discharge Smoke: 35 m3 /min Temperature: 5℃-40℃
Relative Humidity: 20%-65% Atmospheric Pressure: 68kPa-106 kPa
Brief Introduction
Xinxiang North Filter Co., Ltd. is a high-tech enterprise specializing in developing and manufacturing various filters and purification equipments. The company's leading products are divided into four series of products ,namely, air filters, water filters, oil filters, water-oil separation devices, etc. Our company has many kinds of advanced production and testing equipments, HEPA filter production lines and a 500-square-meter cleaning room for thousands of grade filtration.
1. Packaging Details: Carton box and pallets2. Delivery Details: 7-15 workdays 3. Means of Transportation: International express / air / sea4. Loading Port: Shanghai or Tianjin
1. ISO 9001 Certificate 2. CE Certificate 3. BV Certificate 4. IQ Certificate
Currently, our products are already exported to Southeast Asia, North America, Middle East, Australia and Turkey 20 other countries and regions. We have always focused on research, development, innovation and put the product quality and customer service in the first place.
Q1. Are you a manufacturer?Yes, we are a high-tech enterprise which with 20 years experience in developing and manufacturing various filters and purification equipments.Q2. What is your terms of packing?A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.Q3. What is your terms of delivery?A: EXW, FOB, CFR, CIF, DDU.Q4. How about your delivery time?A: Generally, it will take 7 to 15 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.Q5. Can you produce according to the samples?A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.Q6. What is your sample policy?A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.Q7. Do you test all your goods before delivery?A: Yes, we have 100% rigorous test before delivery.Q8.What is your terms of payment?A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.Q9.How do you make our business long-term and good relationship?A:1. We keep good quality and competitive price to ensure our customers benefit ;2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.