260/300mm high-efficiency disc aerator for ponds
260/300mm high-efficiency disc aerator for ponds
260/300mm high-efficiency disc aerator for ponds
260/300mm high-efficiency disc aerator for ponds
260/300mm high-efficiency disc aerator for ponds

260/300mm high-efficiency disc aerator for ponds

$3.00 - 3.50/Set
Place of Origin
Jiangsu, China
Shipping
Air Freight, Ocean Freight, Land Freight

Product Description

Overview

Product Details

Product Description
260/300mm high-efficiency disc aerator for ponds
Product characteristics 1. The gas diffusion rubber plate is made of high-quality synthetic rubber. The bubble diameter diffused from the rubber diaphragm is small, the gas-liquid interface area is large, the mass transfer speed is high, and the oxygen charging efficiency is high. Compared with other existing aeration devices, it can greatly save power consumption and reduce the operation cost of sewage treatment. 2. There are a large number of self closing holes on the rubber diaphragm. With oxygen filling and stop operation, the holes can open and close automatically. Therefore, there is no hole blockage, contamination and other defects. At the same time, the air entering the aerator does not need to be dedusted and purified. When the aerator stops operation, the sewage mixture will not be poured back, which can reduce a lot of operation costs and maintenance workload. 3. Because the membrane microporous aerator can be fully distributed at the bottom of the aeration tank, and the dissolved oxygen in the tank is even, it can be applied to various tank types and depths, and can also be modified to improve the effect of the original aeration tank. 4. As the gas diffusion plate of the membrane type microporous aerator is made of high-quality rubber, it has excellent physical and mechanical properties. The tray, accessories and air pipes are made of engineering plastics, so it is not afraid of corrosion, which greatly reduces the operation and maintenance workload. 5. The air pipe adopts UPVC or ABS engineering plastic pipe (can be selected according to the user's needs), the microporous aeration head is directly screwed on the air distribution pipe, which is convenient for installation and use, and is conducive to maintenance.
260/300mm high-efficiency disc aerator for ponds
Main uses
The variable microporous aerator is designed as a slightly raised arched surface, and the diaphragm has a special imported rubber (EPDM) with an anti adhesion surface, which is made by special processing. The diaphragm hole is opened by a German imported CNC cutter, ensuring the quality and accuracy of the hole. When the aerator is aerated with oxygen, four air supply tanks are designed on the main panel, so that the incoming air can be buffered through the check valve and then directly sent to the center of the aerator head to ensure that the diaphragm can be opened easily with low resistance at one time. The diaphragm is mechanically assembled with rib anti lock to ensure that the diaphragm is not easy to fall off. During air intake, the micropores on the air distribution membrane expand by themselves to ensure air passing through. When the aeration is stopped, the variable micropores on the gas distribution membrane are closed. Because the variable micropores on the gas distribution membrane expand and contract by themselves, the micropores passing through the aerator are not blocked. Secondly, the bottom plate of the aerator is provided with a check valve device to prevent the mixed liquid from entering the gas distribution branch pipe when the gas supply of the pipeline system is stopped, so as to prevent the mixed liquid from entering the branch pipe and being blocked. The incoming air does not need special filtration, the intermittent aeration is not blocked, the aeration is uniform, and the oxygen transfer efficiency is high.
It is mainly used for water treatment of sedimentation tank, sewage treatment tank, accelerated sedimentation tank and clarifierin water plant. This product has the advantages of fast settling speed, reduction of settling time, improvement of water yield andwater purification efficiency, and good effluent quality. It is an effective way to tap the potential of water plants and sewagetreatment projects.
260/300mm high-efficiency disc aerator for ponds
260/300mm high-efficiency disc aerator for ponds
Name 
¢ 215 
¢ 260 
¢ 300
Working ventilation capacity (m3 / h) 
1-3
 1-5 
1-8 
Design ventilation capacity (m3 / h)
2
3
4
 Service area(M2 h)
 0.25-0.45 
0.35-0.65 
0.45-0.75 
Oxygen utilization rate (%) 
> 30 
> 30 
> 30
 Oxygen charging capacity (kgo2 / h)
 0.15-0.35
0.21-0.4 
0.21-0.53 
Theoretical dynamic efficiency (kgo2 / kW. H)
6.5
6.5
6.5
Resistance loss (PA) 
< 3000 
< 3000 
< 3000
 Bubble size(mm) 
1-3
1-3
1-3
Company Profile
260/300mm high-efficiency disc aerator for ponds

The company is a design and development, production and manufacturing, sales and service as one of the aerator production enterprises. After years of hard work and innovation, the company has cooperated with many famous domestic universities in the early 1990s to develop the series of microporous aeration products in sewage

treatment, which has formed a diversified product structure. There are already a series of flat aeration heads, arch aeration heads, tubular aerators, liftable aerators, oxidation ditch aeration series, environmental protection fillers and accessories Andother products.
Company products
260/300mm high-efficiency disc aerator for ponds
Construction effect
260/300mm high-efficiency disc aerator for ponds
Product packaging

Packing in cartons free of charge. If wooden cases or other special requirements are required, part of the cost shall be added
FAQ
Q: Hello! I have some questions that you need to help me answer, can I?A: Yes, I am very happy to answer your question.Q: What is the acceptable MOQ?A: Two cartons for minimum order quantity.
Q:Can you customize the trademark?
A:Brand and product can be customizedQ: What is the delivery time?A: For sample, we usually have stock, so the delivery time will be quite short.For normal order, the delivery time should be in two weeks.Q: What is acceptable pay term?A: T/T.Q: Do you provide sample?A: We can offer free sample for test, and customer needs to pay the freight charge.Q: Thank you for your answer.A: I am very happy to serve you!

Trading Area

Global

Quotation

Name
Company
Phone
Email Address
Requirements
Quotation
Messages