Overview
Product Details
Standard plastic mold steel to cross-sections up to 400 mm for plastic- and die casting-molds with medium dimensions. With Sulphur additive for a better machinability. Mold frame, IHU Tools Characteristics: Weldability: bad Machinability: 5 (1 = very bad - 10 = good) Polishability: not suitable Graining suitability: not suitable Chemical composition P20+S C Si Mn P S Cr Mo min. 0.35 0.30 1.40 0.05 1.80 0.15 max. 0.45 0.50 1.60 0.03 0.10 2.00 0.25 Production Round and Flat Size according to customer's requirement The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting. Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material. This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.