Overview
| Brand | Ryan | Heating Method | Electric Heating |
| Power | Non-Standard Customization | Color | Non-Standard Custom |
Product Details
Product Description＆Parameters
Burn Off Ovens are used frequently in the coatings, fibers, electric motors and plastics industry. Burn off ovens are designed for removing paint, powder coating, epoxies, lacquers, urethanes and other organic or inorganic compounds from a variety of parts, such as: racks, hooks, jigs, fixture. And also for cleaning polymers from a variety of metal parts, such as: moulds, extrusion dies, screws, nozzles, extruders, hot runners, breaker plates.
Working Principle
First, the Primary Burner heats the pyrolysis chamber to 420°C, thermally decomposes the organic materials or polymers in a low oxygen atmosphere, the organic materials or polymers are driven off as smoke, and are put through the afterburner that burns the resulting emissions in a direct-flame, leaving only odorless and harmless H20 (Vapor) and C02 to exit the exhaust stack. During the process, a temperature-sensing probe in the oxidizing chamber monitors the rate of smoke emission from the parts by measuring the stack temperature. When the stack temperature reaches a preset point, the control system turns on a water spray mist to cool the parts, lowering the smoke emission rate before it reaches an ignition state. The water spray also activates if the oven temperature exceeds its set-point temperature by 30°C.
Advantages
- Low labor cost and simple operation
- Siemens Touch-Screen PLC control system
- Cleaning is fully automatic
- Short cycle time (about 2 to 4 hours)
- Optional fuel (Natural gas/Propane gas (LPG)/Diesel) for burners
- Safety and no pollution
Application Industry
- Paint & Powder Coating stripping (Racks, Jigs, Fixtures, Paint hooks and hangers)
- Plastics stripping (Moulds, extrusion dies, screws, nozzles, extruders, hot runners, breaker plates)
- Auto-Parts and Engine Rebuilding
- Fiber & Chemicals
