Overview
Product Details
Dies subject to low pressure, mantle, extrusion press blocks, punches, dies and sleeves for extrusion Chemical composition 1.2329 C Si Mn P S Cr Mo Ni V Cu min. 0.43 0.60 0.65 1.65 0.25 0.45 0.17 max. 0.48 0.75 0.85 0.025 0.025 1.85 0.35 0.60 0.22 0.30 Production Round and Flat Size according to customer's requirement The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting. Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material. This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.