Overview
Product Details
The AMETEK snow maker ejects a mixture of water and air in an appropriate proportion through a nozzle ring with 330 special nozzles. Under suitable weather conditions, this mixture of water and air will crystallize into tiny snow crystals before reaching the ground under the action of a low-pressure fan.Due to the flexible regulation of water flow and the use of a scientific nozzle ring design, from the absolute critical/limit temperature range to the low temperature range, snow generators can efficiently perform snow making operations, and the snow is large and the snow quality is good. The air compressor is located below the hinge cover or detachable cover.The water source can pass through the swing joint under the base of the snow maker or flow directly through the water tank and valve before entering the nozzle ring. After the snow machine is closed, it can be drained on its own. The electric control box is located on the side of the snowmaker.The freeze-prone parts of the snow maker can effectively prevent freezing by installing heating devices.The fan can rotate upwards or horizontally.The snow maker has the following four bases to choose from:L Tripod typeL WheelL TowerL ElevationL Single axle wheelL Hydraulic cantilever type
Specifications:
|
Product name |
Blue sea snow machine |
|
Total power |
29.5kw |
|
Power supply |
3 Phase 380v |
|
Fan |
18.5KW |
|
Air compressor |
4KW |
|
Range |
45 -60 m |
|
Heating system |
4-6 KW |
|
Water volume |
46-60L/min |
|
Snow production |
60-100 m3/h |
|
Water pressure |
0.7-3.5MPa |
|
Nozzle number |
325 |
|
Nuclear device |
20 nuclear nozzles |
|
Filtering system |
60 mesh stainless steel filter |
|
Water pipe interface |
DN40/DN50 |
|
Operating temperature |
0~-30 degrees |
|
Automatic swing device |
Automatic 70 degrees / manual 360 degrees |
|
Pitch angle |
0-45° manually adjustable |
|
Snow production |
80-100 m3/h/-15 degrees |
|
Volume |
Length: 3.2 m, width: 2.1 m, height: 2.3 m |
 |
Brief introduction of product - snow making machine The snowmaker makes ice on an evaporator at 0 ° C and sends it to the ski slopes through cooled air. New snowmaking system affected by atmospheric temperature. The artificial snow making machine is affected by the climate. The snow making temperature of the snow making machine must be below zero, and a certain amount of water must be maintained to make snow. Snowmaking must be optimistic about the weather and the dry humidity of the air. Power is required for snowmaking. The temperature of the snowmaking machine's snow cannot exceed 5 degrees and the temperature is below 0 degrees. Don't make wind and snow |
|
Features of snow making machine The snow making machine can freely make snow with different sizes of 10 mm to 0.3 mm. Using the snow of 0.3 mm, it is possible to pave a snow path close to natural snow. 1. Large-scale ice-making, high efficiency-up to 190ton / day ice-making capacity. 2. High efficiency and easy maintenance-adopting hot gas deicing method, the deicing efficiency is high, simplifying unnecessary maintenance. 3. Compatible with long-distance transportation-can reach more than 60M. |
|
