Overview
Product Details
Plastic mold steel with nickel for a better through hardenability for cross-sections over 400mm, suitable for graining. plastic molds over 400, mold frames, die-casting molds, IHU-tools, forging dies, forging tools, tools, tube extrusion presses Characteristics: Weldability: bad Machinability: 5 (1 = very bad - 10 = good) Polishability: yes Graining suitability: yes Chemical composition 1.2738 C Si Mn P S Cr Mo Ni min. 0,35 0,2 1,3 1,8 0,15 0,9 max. 0,45 0,4 1,6 0.03 0.03 2,1 0,25 1,2 Production Round and Flat Size according to customer's requirement The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting. Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material. This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.