XPON ONU

1. Overview 1GE3EF+WIFI+CATV is designed as HGU (Home Gateway Unit) in deferent FTTH solutions by, The carrier-class FTTH application provides data service access. 1GE3EF+WIF+CATV is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT. 1GE3EF+WIF+CATV adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0 and GPON Standard of ITU-TG.984.X 1GE3EF+WIF+CATV is designed by Hisilicon chipset 2. Functional Feature Support EPON/GPON mode and switch mode automatically Support ONU auto-discovery/Link detection/remote upgrade of software WAN connections support Route and Bridge mode Route mode supports PPPoE/DHCP/ static IP Support WIFI Interface and multiple SSID Support CATV interface for Video Service and control by OLT Support QoS and DBA Support port Isolation and port vlan configuration Support Firewall function and IGMP snooping/Proxy multicast feature Support LAN IP and DHCP Server configuration Support Port Forwarding and Loop-Detect Support TR069 remote configuration and maintenance Specialized design for system breakdown prevention to maintain stable system 3. Hardware Specification Technical item Details PON Interface 1 G/EPON port(EPON PX20+ and GPON Class B+) Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM Wavelength TX: 1310nm, RX: 1490nm Optical Interface SC/APC Connector LAN Interface 1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector CATV Interface RF, WDM ,optical power : +2~-18dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz,  RF output impedance: 75Ω RF output level: 78dBuV AGC range: 0~-15dBm MER: ≥32dB@-15dBm Wireless Compliant with IEEE802.11b/g/n, Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps, 2T2R,2 external antenna 5dBi, Support: Multiple SSID Channel: Auto Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAM LED 10 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2、Internet、Worn、 Normal Push-Button 3,For Function of Reset, WLAN, WPS Operating Condition Temperature: 0℃~+50℃ Humidity: 10%～90%（non-condensing） Storing Condition Temperature: -30℃~+60℃ Humidity: 10%~90%（non-condensing） Power Supply DC 12V/1A Power Consumption ≤6W Dimension 155mm×92mm×34mm（L×W×H） Net Weight 0.24Kg 4. Panel lights Introduction Pilot Lamp Status Description WIFI On The WIFI interface is up. Blink The WIFI interface is sending or/and receiving data (ACT). Off The WIFI interface is down. WPS Blink The WIFI interface is securely establishing a connection. Off The WIFI interface does not establish a secure connection. PWR On The device is powered up. Off The device is powered down. LOS Blink The device doses not receive optical signals. Off The device has received optical signal. PON On The device has registered to the PON system. Blink The device is registering the PON system. Off The device registration is incorrect. LAN1~LAN2 On Port (LANx) is connected properly (LINK). Blink Port (LANx) is sending or/and receiving data (ACT). Off Port (LANx) connection exception or not connected. INTERNET Blink The device network connection is normal. Off The device network connection is abnormal. Worn (CATV) On Input optical power is higher than 3dbm or lower than -13dbm Off Input optical power is between -13dbm and 3dbm Normal (CATV) On Input optical power is between -13dbm and 3dbm Off Input optical power is higher than 3dbm or lower than -13dbm 5. Application Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) Typical Business：INTERNET、IPTV、IP Camera 、WIFI 、CATV etc