Overview
Product Details
Product introductionMainly used with gold, silver, lead, zinc, iron, molybdenum, copper, antimony mine, mine, all ball mill can be selected grind gold machine can be used. Characteristics: grind gold through the raw material mixing, rolling, crushing, rolling repeatedly reach moisture equilibrium ratio of uniform, low gas content, improve the forming rate and forming quality, grind the material through the machine molding Products with high density, good strength, no porosity ratio weight. Energy efficient, high volume of output, the product is used for iron ore process tailings recovery, not to slag the loss of effective resources can be fully utilizedUse and Maintenance The raw material should be put into the machine after the machine running normally.
This machine is not allowed to state with the material in the machine. If the machine is stopped because of stoppage, the residual material in the machine should be cleared. Then start the machine again. The material should be put into the machine uniformity, not sometimes much sometimes less. It's better to use a feeding equipment. The bearing part should be add butter regularly. Every bolts should be checked to avoid flexible. The bearing should be changed in time if it is damaged to avoid damage other parts.While the machine is running formally, you should check if there is abnormal sound in the reducer box and or bearing part, if there is a too high temperature, if there is too big motor current and so on. If it happened, you should stop the machine to remedy of the trouble.The motor V-belt should be removed while examine and repair the machine for your safe
Working principle1.When inputting gold sand into the rolling drum, the rollers compress the sand over and over into tiny particles.2.Please put in 5 kg mercury at first, the mercury can absorb the gold or other metals.3.At last, use a high-density red cloth to wrap mercury up.4.Then squeeze it, the mercury will be pressed out and pure gold stayed.5.As to the large capacity, we can use mercury shaking machine and mercury steamer to replace the manual work.
we had 2 types wet pan mill in order to meet more customers' demands
Machine Parts
Name: motors
Brand: Shengda
Original: Kaifeng
2 years warranty
Machine Parts
Name: water panBrand: HuahongOriginal: Henanthickness: 8mm. others are 4mm or 6mm.
water pan size are customised as customers' differenct requests.
Other parts
longtime provide availeble
Rollers
material: casting iron with Mn. withour any holes on the surface
thickness: 200mm
Grinding base
thickness: 100 mm
material: casting iron with Mn. (same as rollers)
Frame
CIQ/PSI for Sudan custom Embassy and Invoice certificates for Egypt custom
Ball mill
91.8% Response Rate
jaw crusher
91.8% Response Rate
Gold centrifugal
91.8% Response Rate
Our factory located in Zhengzhou City,Henan Province, there has air port called CGO, welcome to visit our factor in any time.It need 1hr from air port to factory.