Overview
Product Details
Cable diameter | 4MM |
Sensing wires | 2*30 AWG with jacket of conductive fluoropolymer |
Carrier | Fluoropolymer |
Cable weight(50 ft/15m length) | 450g |
Cable color | High-visibility yellow |
Breaking strength | Cable only:5KG |
Abrasion resistance | >65 cycles per UL719 |
Maximum continuous operating temperature | 70degree |
Leak size to alarm(tap water) | 2 in(50mm)maximum at any piont along sensing cable ,up to 5000 ft maximum system length |
Drying time | Cable dries and resets within 15 seconds fo removal from standing water |
Standard cleaning method | Wipe with clean damp cloth |
Please kindly contact us if you need to custmize the connector like RJ11, 3.5MM earphone Jack or Power bank connector etc.
Non-Locating Water Leak Sensor Cable A-LC1D
AnYing@ sensing cables detect the presence of water at any point along their length. Installed with Non-locating module(A-LC1A),the cable senses water intrusion and triggers an alarm.
Distributed sensing
A-LC1D sensing cables provide distributed leak detection and location over a wide range of areas.The cable is available in a variety of lengths to provide as much coverage as needed.
Design flexibility
A-LC1D sensing cable is supplied with factory-installed plastic connectors that plug together. The cable is designed of a range of applications,including data center subfloors,telecommunication rooms HVAC equipment locations,pipes,electrical vaults,storage areas,tanks,and roofs.The cable is small,lightweitht,and flexible,allowing easy installation.The smooth design allows for quick drying.
Advanced technology
The conductive-polymer technology and fluoropolymer construction make A-LC1D sensing cable mechanically strong and resistant to corrosion and abrasion.The cable is constructed of two sensing wires, embedded in a fluoropolymer carrer rod.The alarm module constantly monitors the sensing cable for continuity.The rugged cable construction exposes no metal,and enables the cable to be reused even in corrosive environments.