Overview
Product Details
Standard plastic mold steel for plastic- and die casting-molds with medium dimensions up to cross-sections of approximately 400 mm. Also for Jigs, base plates, extrusion presses, die inserts, die holders and parts for general machine construction. Characteristics: Weldability: bad Machinability: 6 (1 = very bad - 10 = good) Polishability: no Corrosion class: 2 (0 = weak - 5 = good) Chemical composition 1.2311 C Si Mn P S Cr Mo min. 0.35 0,20 1.3 1.8 0.15 max. 0.45 0,40 1.6 0.03 0.03 2.1 0.25 Production Round and Flat Size according to customer's requirement The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting. Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material. This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand. This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.