Overview
Product Details
Big diameter plastic PE PP HDPE PVC double wall corrugated pipe making machine
SGB800(inner diameter Φ200-800mm) PE HDPE PP plastic double wall corrugated pipe extrusion machine has two single-screw extruder. The double wall corrugated tube machine has a dual-channel structure and nitriding polishing head. The forming machine of this plastic tube machine adopts horizontal structure, advanced water cooling system, vacuum forming system, automatic lubrication system and advanced double-layer on-line expansion function. The material of the molds is aluminum alloy. The complete production line uses the German Siemens production of professional PLC control system. It has a high degree of automation, reliable operation, easy operation and so on. The corrugated machine production speed is based on the extruder capacity.
The double wall corrugated tube machine uses HDPE / PP as raw materials. The inner wall of the double wall corrugated pipe produced by this corrugated tube machine is very smooth and flat. And the outer wall is trapezoidal corrugated shape. This kind of double wall corrugated pipe has the characteristics of good corrosion resistance, high insulation, small flow resistance etc. as the ordinary plastic pipe, but also because of special inner and outer wall hollow ring structure, it has the advantages of high rigidity, light weight, high pressure resistance, good toughness, abrasion resistance, impact resistance, not easy damage, convenient construction, low installation cost, long service life etc. The double wall corrugated pipe is generally connected by the expansion socket and the sealing ring. This can effectively prevent the impact of thermal expansion and contraction. The double wall corrugated pipe is widely used in the fields of highway, railway roadbed, subway engineering, waste landfill, tunnel, green belt, sports field and high water content caused by the slope protection and other drainage areas.
Contact person: Mr James, Contact Mobile/ WhatsApp: +86 13812851662.
The characteristics of PE HDPE PP plastic double wall corrugated drainage tube production machine:
1. The double wall corrugated tube machine uses two high-speed single-screw extruders. Single-screw extruder: We use PE high-speed high-efficiency single-screw extruder. Its barrel is slotted type design. It is also equipped with a low-noise fan and a high-speed hard-surface gear box. The inner and outer layers of the double wall corrugated pipes are independently fed by two extruders. It achieves the use of different colors and different raw materials production, and ensures efficient extrusion.
2. Extrusion mold: It has dual flow channel structure. It goes through the nitriding and polishing process. The special design of the die is suitable for the production of different materials and different ring stiffness pipes. The special mold structure ensures that the inner and outer layers are evenly and stably formed.
3. Forming machine: It adopts horizontal structure and chain drive design. At the same time, it is also equipped with an open water cooling system and a vacuum forming system. This ensures a high production rate for continuous production. The mold adopts the mechanical up and down synchronous drive and the advanced programmable lubrication system. These make the molds have a long service life, ensure the accuracy of the operation and ensure the quality of the pipe. Because of using advanced online expansion function, we can expand the double wall corrugated pipe online.
4. Molds: The corrugated forming module is made of special alloy material through precision casting. It has high precision, strength, wear resistance and excellent heat dissipation effect. By using advanced module rapid replacement system, the replacement time of the module is greatly reduced. According to the different requirements of different customers , we can design different wave type forming module.
Model |
SGB800 |
SGB600 |
SGB400 |
SGB250 |
SGB160 |
Structure Form |
Vertical |
Vertical |
Horizontal |
Horizontal |
Horizontal |
Pipe Diameter Range |
225-800mm |
250-600mm |
225-400mm |
90-250mm |
75-160mm |
Max Extrusion Output |
850kg/h |
700kg/h |
600kg/h |
350kg/h |
200kg/h |
Expansion Mode |
Belling-on-line,double-wall socket joint |
Belling-on-line,double-wall socket joint |
Belling-on-line,double-wall socket joint |
Belling-on-line,double-wall socket joint |
Belling-on-line,double-wall socket joint |
Forming Speed |
0.25-3m/min |
0.25-4m/min |
0.25-4m/min |
0.5-5m/min |
0.6-5m/min |
Centre Height |
1600mm |
1600mm |
1150mm |
1150mm |
1000mm |
Number of Mold Blocks(pairs) |
32 |
32 |
40 |
48 |
48 |
Question and answer 1. Q: Your company is a transactional company or an industrial manufacture factory? A: We are an industrial manufacture factory which locates in Zhangjiagang city.2. Q: All of your products are made by your self or compacted via purchasing the others? A: We have independent technical team who focus on making machines, all the products are made by our technical team.3. Q: What is the ability of your factory? A: About 90 lines per year.