Overview
Product Details
Anti uv fr v0 PC pellet High Heat PC Resin Glass Fiber Filled 15% 30% Gf PC Gf15 Gf30 Product Description
Polycarbonate Resin (PC plastic raw material) is used on optical storage media, it is: - High purity - Low viscosity - Easy release Polycarbonate Resin (PC plastic raw material) is an excellent engineering thermoplastic, with fine impact resistance, easily processing, good dimensional stability, high heat resistance, non-toxic, low water absorption and good dielectric properties. Being recognized as the only one with good transparency in the five key engineering plastics (PA, PC, PBT, POM, PPO), polycarbonate occupies the most rapid market growth in recent years.
Product Description | PC plastic raw material |
Product Grade | Injection and blowing Grade |
Appearance | Nature pellet |
Item | Typical Characteristic | Testing Standard |
Density | 1.2 g/cm3 | ASTM D-792 |
Melt Flow Rate | 2.5 g/10min | ASTM D-1238 |
Molding Shrinkage (at 3.2mm) |
5-7 10-3 | ASTM D-955 |
Water Absorption | 0.15% | ASTM D-570 |
Flexural Modulus | 2345MPa | ASTM D-790 |
Flexural Strength | 95MPa | ASTM D-790 |
Tensile rate Break point |
110% | ASTM D-638 |
Tensile StrengthYield Point Break Point | 6265 MPaMPa | ASTM D-638 |
Notched impact strength at 23°C |
747J/m | ASTM D-256 |
Heat Deflection Temperature at 0.45MPa |
138℃ | ASTM D-648 |
Vicat Softening Point | 157℃ | ASTM D-1525 |
CLTE | 6.8×10 1/°C | ASTM D-831 |
Trading Area
Global