Overview
Product Details
PBAT+PLA+starch PVA biodegradable plastic film blowing machine
Main specification of the production line:-
Raw Material use : Biodegradable/PLA/CORNSTARCH Material
Screw Dia 50mm
Lay flat width (with gusset ):100mm-600mm
Thickness : 0.008mm-0.10mm tolerance: ≤(±5%)
Production capacity: 25-30 kg/h depend on the thickness of the film
Take-up speed: 60m/min
Power supply: 380v, 50Hz 3 Phase/15kw
All heaters is inside is Al, outside is stainless
Paper Sleeve cone ID 75 mm or 3 Inch
Machine dimension(M): 4.6 x 2.6 x 4.2
Weight: 2900 KG
Characteristic
main motor and take-up motor are controlled by inverter 15KW
by pneumatic cylinder system to adjust the gap of take-up and embossing roller
equipped with A-FORM board to make the gusset
material of screw and barrel: 38CrMoAlA Polished with Niterided Treatmenthardness of heat treatment: screw HV≥740, barrel HV≥900depth of hardening:0.6-0.7mmbrittleness grade: ≤2 grade
Gear box: Surface heat quenching and tempering/auto. Oil lubricated
Die material: steel 45#/surface treatment of flow channel: hard chrome- plating
Digital display temperature controller
Extrusion Unit
Screw Diameter(mm): Φ50 , special screw for biodegradable screw
Screw L/D ratio:32:1
Cycling cooling: 1/2 HP blower x 2
AC Driving motor: 15KW
Screw Speed 0 to120 RPM Controlled by AC Drive Inverter
Barrel cooling 120w or more watt.
Heating Control(zone) 4
Heating capacity: 10 kw
Air compressor and all necessary Air tubes and connectors Air compressor of 3 HP
Screen changer
Method of Filter changing: Manual type
Heating control(zone):1
Heating capacity: 1kw
Extrusion Die
Form of die: Fixed Die head, special for Biodegradable material type
Die Diameter: as requirement,
Die gap: 1.2mm
Heating Control(zone): 1
Heating Capacity: 1.5 kw
Aluminum Alloyed Type of air ring: single type
Air blower:1.5Kw
Take-Up Unit
Roller width(mm): 700
Effective width(mm): 600
Take-up motor(kw): 0.75kw
With A- form wooden frame for T-shirt bags Blowing
with embossing shaft to emboss on the surface of film
Bubble Stabilizer
Winding Unit
Type of winder: Single Rewinder, with surface treatment for static removing
Roller width(mm):700
Effective width(mm): 600
Winding motor: DC Torque Motor
Winding speed (M/min): Max. 60
With air compressor
Contact Information Nanjing Yongjie Qixin Machinery Equipment Co.,LtdAdd. : No.9 Lanxia Road, Moling Industrial Concentration Area, Jiangning District,211165, Nanjing, ChinaTel.: 0086 25 52750152Fax: 0086 25 58736139 Contact person:AnnieMob/whatsapp/Line/Wechat:0086 15026670964Skype: annie at njyjhg.com(same as email)Website: www.njyjhg.com
|