dynamic balance testing machine

Overview

Product Details

Product Description

dynamic balance testing machine

Brief Introduction:

WAW -2000H Series Computer Control Electro-hydraulic Servo Hydraulic Universal Testing Machine, compared with a ball screw type electric mechanical UTM, is adopting oil hydraulic power to push the piston in the oil cylinder to provide loading force. Therefore it is very suitable for making test to different metal and nonmetal materials under high toughness and hardness against extreme big loading force. By using oil pressure transducer and photoelectric encoder, the computer is

timely collecting the testing parameter like loading force, stroke etc. The servo system will provide on line close loop control and constant parameters control. The test software is able to create customized testing methods and setup testing report in only a few steps. WAW series is widely used in different inspection department, engineering area, universities and institutes.

Load Frame: The oil cylinder is at the bottom of the load frame. Tension space is at the upside and compression & bending spaces are between lower crosshead and working table. It is adopting oil hydraulic power to push the piston in the oil cylinder to provide loading force. The lower crosshead is driven by motor through decelerator, chain transmission device and screw pair to realize the adjustment of testing space. Measuring System: The machine adopts oil pressure transducer to measure load and use photoelectric encoder to measure the displacement. The loading force display on computerFeatures:1> Full computer controlled of testing process.2> Overload protection will secure operators3> Adopt oil-hydraulic automatic clamps which can be operated from separate control box4> Programmable testing software makes LCF testing or cyclic testing become availableWedge tension jaw processed by advanced technology; increase the stiffness of crosshead under high load and high intensity test.5> Powerful multifunctional control software will provide more testing methods to meet ASTM, ISO and other testing standards.6> Report guide will create your testing report in only three steps

Technical parameter

Mode	WAW-2000H
Max. Load capacity	2000KN
Load accuracy	Within ±1%
Max. Distance between two tensile grips (include the piston stroke)	800mm
Max. Distance between two compression platen	700mm
Compression platen size	250*250
Max. Piston stoke	200mm
Tensile fixture Round specimen fixture	Φ10-Φ30mm Φ30-Φ50mm Φ50-Φ70mm
Tensile fixture Flat specimen fixture	0-25mm 25-50mm
Max Flat specimen clamping width	140mm
Max round specimen clamping width	90mm
Bending fixture	Elbow Diameter 40mm
Crosshead moving speed	150mm/min
Distance between columns	600 mm
Cabinet dimension	900700950mm
Frame dimension ( include max piston stroke)	150011003700mm
Packing	Export wooden cases
Weight	7500 kgs
Power supply	Three-phase 380V 50HZ (special requirement can be met)

Configuration

No.	Name	Specification	Quantity
1	Host		1
2	Cabinet		1
4	Computer data collection card		1
5	Computer measurement software		1
6	Oil pressure transducer		1
7	Optical encoder		1
8	Computer		1
9	Printer		1
10	Round specimen specification mm	Φ10-Φ30mm Φ30-Φ50mm Φ50-Φ70mm	each for 1 set
11	Flat specimen specification mm	0-25mm 25-50mm	each for 1 set
12	Compression fixture mm	Φ250 mm	1 sets
13	Bending fixture	Elbow Diameter 40mm	1
14	Accompany documents		1

Machine detail photo

Crosshead

Oil piston

Columns and Screws

Bending Accessory

Oil Pipe

Tensile test accessory

200T UTM

200 T test sample the diameter is 50mm

Software

MAXTEST Software Interface

One machine can add four load cell

One machine can add 8 extensometer

Software have all kinds of test standards

Test report can print with excel

Also can do one set test. The software can Comparative and analysis test data

Working shop

Company Cerfificate

FAQ

Q: Are you trading company or manufacturer ?A: We are factory.Q: How long is your delivery time?A: Generally it is 3-7 days if the machine is standard are in stock. or it is 15-20 days if the machine is special are not in stock, it is according to specification.Q: What is your terms of payment ?A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance ,balance before shippment.B: Payment by overseadia Trade Assurance. We are a member of overseadia Trade Assurance which is a new service provided by overseadia, safeguarding buyer's payment to suppliers to ensure suppliers fulfill their obligations regarding order delivery and product quality. If you have another question, pls feel free to contact us as below:

Trading Area