SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools

SBK-500KVA low voltage three phase step up down dry type transformer for machine tools

$20.00 - 500.00/Set
Place of Origin
Zhejiang, China
Shipping
Air Freight, Ocean Freight, Land Freight

Product Description

Overview

Supply Ability
100000 Set/Sets per Month
Certificate
CE / ISO9001
Coil Number
AUTOTRANSFORMER
Capacity
0.5kva-2000kva
Place of Origin
Zhejiang, China
Brand Name
ZHENGXI or OEM
Voltage change rate
≤1.5%
Picture Example
Usage
Power
Model Number
SBK-500KVA
Port
Ningbo or Shanghai
Efficiency
≥98%
Packaging Details
export standard package,carton,wooden case
Frequency
50Hz/60Hz
Insulation resistance
≥150Ω
Output voltage
Can Customized
Phase
Three
lead time
3-5days
Output voltage accuracy
±1%
Coil Structure
TOROIDAL
Input Voltage
Can Customized

Product Details

General
SBK series three-phase dry-type transformer, suitable for AC 50 ~ 60Hz, input voltage does not exceed 1000V in the circuit, as a variety of machine tools, mechanical equipment and other general electrical control power, local lighting and indicating power, can also be used as a small power Power supply
Structure
SG and SBK series three-phase dry-type transformers can be made into open or protective type, with the advantages of low loss, low noise, good fire performance and no pollution to the environment. Transformers are divided into control transformers and lighting transformers according to the purpose of the products; control transformers are fixed transformers; lighting transformers are portable transformers except for lighting transformers for machine tools. The iron core of the transformer is made of cold-rolled silicon steel sheet, and the steel yoke is clamped on both sides by a steel or steel plate and fastened by a screw. According to the structure, the product is divided into two types: open type and protective type. The protective type is made of steel plate into a case, the transformer is inside the case, and there is an inlet and outlet hole outside the case to install the power line. If necessary, increase the voltmeter, ammeter, temperature controller, steering wheel, etc. according to user requirements, in order to move.
Normally Use Condition
Altitude: the altitude of the installation site does not exceed 2000m;Temperature: the ambient air temperature does not exceed +40℃, and the average temperature within 24 h does not exceed +35℃, the lower limit of ambient air temperature is -5℃;Humidity: When the maximum temperature is +40℃, the relative humidity of the air does not exceed 50%; at lower temperatures, higher relative humidity can be allowed, for example, 90% at +20℃; Installed in places where there is no severe vibration or shock vibration; In a non-explosive hazardous medium, where there is no corrosive metal and insulating gas and conductive dust.Input and output voltage can be customized according to customer needs
Technical Date Sheet
Brand name
ZX
Product name
Dry type transformer
Model
SBK series
Output voltage accuracy
±1%
Voltage change rate
≤1.5%
Output waveform distortion
No distortion (compared to the input waveform)
Insulation class and IP rating
Class F, Class H, and HC are available (normally Class F) IP rating: IP00, IP20, etc.
Work efficiency
≥98%
Frequency
50/60HZ
Connection method
Y/
Overload capacity
Allows to work for more than 1.2 times the rated load for 4 hours (can long-term full load)
Noise
≤35Db
Temperature rise
≤60℃
Insulation resistance
≥150MΩ
Design life
30 year
Working environment
Temperature:-20℃ + 45℃ Humidity:≤95% non-condensing
Workplace
No corrosive gas and conductive dust
Safety standards
VDE0550. IEC439. JB5555. GB226
Cooling method
Dry air cooling
Product Description
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
SBK-500KVA low voltage three phase step up down dry type transformer for machine tools
Q 1. What's the payment term?
A. We accept TT,30% deposit and 70% balance against copy of BL.
Q 2. How's the delivery time ?
A.Usually it will take about 7-20 days for production. For sample usually in 1 week.
Q 3. Tell me the standard of package?
A. For the small capacity, color box as inner package and carton as delivery package. For big capacity, use strong wooden case for protection.
Q 4. What kind of material of transformer?
A. For servo type transformer, we have two types, one 100% copper and the other is copper with aluminum. It depends on your requirement . In fact, those two have no difference if normal work well. Only except the long life. Copper is better and also higher price. For relay type transformer, we use toroidal coils, the material is aluminum. comparing with square coils, toroidal coils with high efficiency.
Q 5.Could you offer Form A or C/O ?
A. It's totally not a problem. We can prepare relative documents to foreign affairs office or other offices to apply for this certificate.
Q 6.Would you accept to use our logo ?
A.Our logo is ZX. If your order, has good quantity, it's absolutely no problem to do OEM. But if you use our logo ZX, it will be high appreciated.
Q 7.We want to know month capacity.
A. It depends on which model. For example for relay type small capacity , month capacity can reach near 10000pcs and big capacity near 2000pcs.
Q 8.Where is your market?
A. Our products are popular in North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, MidEast, Eastern Asia, Western Europe and so on. Some of them are our regular customers and some of them are developing. We hope you can join us and make mutual benefits from our cooperation.
Q 9. What kind of certificate you have ?
A. Our company already obtained CE , ISO9001, PCT, SGS. design and technical patents certificates.

Trading Area

Global

Quotation

Name
Company
Phone
Email Address
Requirements
Quotation
Zhejiang, China
Chat
ManufacturerTraders
Messages