Overview
Product Details
New professional washbox for sale
Jigger DescriptionsOur Saw-tooth Wave Jigger is a new type of energy saving and high efficient gravity separation equipment and developed based on the traditional Sine Wave Jigger. The difference between Saw-tooth Wave Jigger and Sine Wave Jigger is that the pulsation curve for jigging is saw-tooth wave shape, with speedy upward flow and slow downward flow. Bed layer is elevated integrally and slowly dropped with a long effective loose time, allowing significant increase of handling capacity for unit screen surface, decrease of lower limit of grain size recovery and large save of make-up water for under size fraction. In practice, contrast of Saw-tooth Wave Jigger and Sine Wave Jigger shows up raises of recovery of Saw-tooth Wave Jig: Sn:3.01%, W:5.5%, Pb:1.63%, Zn:2.04%.
Saw-tooth wave series jigger is one of the gravity separation equipment. It is of large capacity, wide range of sorting grain size, simple operation and maintenance, widely used as coarse or fine sorting machine in the beneficiation of gold, tin-tungsten, titanium, hematite, too, coal and other minerals.
Jigger Advantages and Characteristics
- High capacity
- High concentration ratio and high recovery
- Easy to install, operate and maintain
- The pulsation curve is saw-tooth wave shape facilitate heavy
- Can achieve a good result in processing such as placer gold, mineral to settling
- Saving water 30-40% than ordinary jig
- The pulsation speed very easily adjusted by regulator
- tungsten,iron, tin, hematite, copper, tantalum-niobium, titanium, manganese, barite, zirconium, chrome and gemstone etc
Jigger structure:
Jigger working principle:
Jig machines need water to work, and it loosens materials in vertical alternative water-flows, and it forms different layers of materials of different densities and discharges both layers from up and down discharging ports separately. The basic composition of jigger is jigging chambers, also called jigging boxes, and there are screens in each chamber.
Water and raw ore will be fed from one end of the jigger screen, the ore granules will move in the vertical alternative water-flows. Layers will be formed because of density difference of materials. The minerals with small density will be in the up layer and will flow together with the up pulp flow while material with bigger density will be in the down layer and will discharged from the down discharging port as jigging concentrate.
Jigger Technical Data:
type | model | length× width(mm) | Jigging Chamber area (m2) | The number Of General Jigging chamber | General Area of jigging Chamber (m2) | Stroke Coefficient | Diaphragm stroke | The maximum Feed size (mm) | Processing capacity (t/h ) | Water consumption(t/h) |
Lateral driven | LTP-34/2 | 450×300 | 0.135 | 2 | 0.27 | 0.58 | 0~25 | 12 | 2~6 | 4~10 |
Bottom driven | LTA-55/2 | 500×500 | 0.25 | 0.5 | 0.5 | 0~26 | 5 | 1~5 | 4~20 | |
LTA-1010/2 | 1000×1000 | 1 | 2 | 0~25 | 5~15 | 20~60 | ||||
RevibratingRe- | 0~5 | 2~10 | 4~5 | 40~45 | ||||||
Side driven | LTC- 69/2 | 900×600 | 0.54 | 1.08 | 0.56 | 0~50 | 12 | 6~9 | 40~60 | |
2LTC-79/4 | 900×700 | 0.63 | 4 | 2.52 | 0.48 | 5~15 | 20~90 | |||
2LTC-912/4 | 1200×900 | 1.08 | 4.32 | 0.49 | 7~25 | 60~120 | ||||
2LTC-366/8T | 600×(300~600) | 0.2~0.34 | 8 | 2.16 | 0.68~0.40 | 5 | 3~6 | 20~40 | ||
2LTC-6109/8T | 900×(600~1000) | 0.58~0.86 | 5.76 | 0.52~0.35 | 10~20 | 80~120 |
These are our jigger pictures:
1. What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.
* What minerals are you separating?
* What's the maximum size of your raw minerals?
* How much capacity do you need per hour for your project?
Note: If Pics of the mineral & Chemical components report of your minerals are available, pls consider to send us for evaluation purposes.
2. Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?
Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.
3. Can we vist your company?
Yes, our company warmly welcome clients to visit our company at anytime. we will prepare the VISA for you, and arrange hotel, traffic, translator in order to let you stay comfortable while you are visiting us. Moreover, during the visiting, you can check our factory and machinery, and take tour to some of the nearby mining project build by our company. Also, we can throughly discuss your project in order to build a flawless project in the future.
4. How long is the warrenty of your equipments? Does your company supply the spare parts?
The warranty period of SENTA equipments is one year. And of course we will supply te spare parts for you for life-long time at lowest cost.
5. If i need the complete mineral processing line. is SENTA able to help us build it?
Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need. we had already build many mining projects in China & Overseas. SENTA can set a complete processing line just as you require, the main equipments will be manufactured by us and some other supporting equipments ( like generator ) will be supplied by our cooperating facotries under our supervision.