Overview
| Place of Origin | China | Warranty of core components | 1 Year |
| After Warranty Service | Video technical support | Application | Waste Oil Refinery Equipment |
| Picture Example | Working pressure | Negative Pressure | |
| Type | Vacuum Distillation | Applicable Industries | Building Material Shops, Manufacturing Plant, Construction works , Energy & Mining, Other |
| Function | Oil Filter | Brand Name | Zhongming |
| Material | Q345R | Advantages | High Efficiency |
| Video outgoing-inspection | Provided | Condition | New |
| End product | Non-standard Diesel Oil | Machinery Test Report | Not Available |
| Name | Crude Oil Refinery | Heating method | Fuel Heating |
| Marketing Type | New Product 2021 | Raw material | Black Engine Oil |
| Local Service Location | None | Warranty | 1 Year |
| Supply Ability | 20 Set/Sets per Month | Core Components | Pressure vessel |
| Power | 25 | Weight | 40000 kg |
| Certification | CE ISO | Showroom Location | None |
| Packaging Details | Car | Voltage | 220v |
| After-sales Service Provided | Field installation, commissioning and training | Port | Port of Lianyungang |
Product Details
Technological process
Product application
1: The negative pressure distillation device for waste oil and tire oil is designed as a continuous production process, and the waste oil and tire oil are pumped into the preheating system through negative pressure vacuum. After heating, it will be automatically sent to the distillation kettle (at normal temperature 380 ℃). When the vacuum degree is adjusted to -0.03mpa, about 80% of fuel oil (diesel) base oil can be produced (the requirements for feed oil are the same as that for the production of fuel oil, and the vacuum degree should be controlled above -0.08mpa). The production mode of one-time feeding is adopted. With the change of temperature, the gas enters the condensation system of the equipment after purification in the gas tower. When the gas passes through primary condensation, 95% of the oil and gas is transformed, Then enter the secondary condenser, the remaining 3% - 5% of the gas is converted, and then enter the tertiary vertical condenser to prevent a small amount of gas from being unable to be converted. That is, the unconverted gas enters the oil-gas separation system. Finally, it enters the furnace for combustion support.
2. Negative pressure environmental protection type: smokeless, tasteless and no secondary pollution in the production process; In order to meet the environmental emission standard, the burned gas is further purified to meet the national emission standard. There is an atomization tower device, primary dust removal and secondary atomization.
3: The equipment can be operated by using fuel oil or natural gas as heat source (non condensable gas is used for heating in the production process to save fuel)
Raw material properties
|
NO. |
Rawmaterialcomposition |
Waste engine oil / tire oil) |
|
1 |
Oil content (%) |
90%,85% |
|
2 |
Moisturecontent(%) |
3%~5% |
|
3 |
Impurities (%) |
3%~7% |
|
4 |
proportion |
0.86-0.9 |
Specification for diesel engine waste oil refining
|
project |
content |
||
|
Equipment model |
ZMFY-10 |
ZMFY-20 |
ZMFY-30 |
|
Applicable raw materials |
Waste engine oil, cracked crude oil, crude oil, lubricating oil, etc |
||
|
Final product |
Non standard diesel, gasoline, base oil |
||
|
structural style |
Horizontal stationary |
||
|
Cracking furnace size |
Φ1600*5500 |
Φ2200*6600 |
Φ2500*7000 |
|
Cracking furnace material |
Q345R/Q235R/310S Stainless steel boiler plate |
||
|
Cracking furnace thickness |
14mm/16mm/18mm/20mm |
||
|
Daily processing capacity |
10T |
20T |
30T |
|
Oil yield |
85%-90% |
||
|
working pressure |
Negative pressure production |
||
|
Available fuel |
Natural gas, fuel oil |
||
|
Total installed power |
25kw/h |
||
|
Equipment floor area |
20m*30m*9m |
||
|
Cooling mode |
circulating water |
||
|
Single manual |
3 persons / set |
||
|
Installation mode |
Guide installation |
||
safety problem:
1) Each system on the equipment is equipped with pressure gauge and thermometer. As long as the pressure exceeds the normal range, the system will automatically alarm.
2) The control system is equipped with a one key emergency stop device. In case of problems, press one key emergency stop directly and the equipment stops running. The control cabinet is equipped with thermocouple and remote pressure for real-time monitoring.
3) There are thermometer, pressure gauge and explosion-proof valve on the water seal. Once the pressure exceeds the normal range, the equipment will automatically relieve the pressure.
4) A flame arrester is equipped after the water seal to prevent the ignition source from backfiring.
Our services
Pre sales service
∗Inquiry and advisory services
∗Sample test support
∗View our factory
After-sale service
∗Training on how to install the machine and how to use the machine.
∗Engineers can serve overseas machinery.
If you are looking for a new project now, please contact us for more information about pyrolysis system!