Overview
Product Details
High dimensional stability of materials after quenching. Abrasion resistant, used for calibrating gauges, measuring plates, screw taps, dies, watchmakers tools, paper; leather; wood klives, punches. Characteristics: soft annealed max. 229 HB Machinability: 5 (1 = bad - 10 = good) Weldability: bad Corrosion class: 1 (0 = low - 5 = good Chemical composition: O2 C Si Mn P S Cr V Mo Ni min. 0.85 1.40 max. 0.95 0.50 1.80 0.03 0.02 0.35 0.30 0.30 0.30 Production: Round and Flat Size according to customer's requirement Benefit of sawn cuts: The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting. Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material. This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.