Overview
Product Details
Their high hardness makes it especially suitable for severe wear applications such as forming operations and cold cut on sliding surfaces and molds for ceramics. It is used in cutting tools like knives, dies, punches, scissors. In escariadores, mandrels, drawing dies, gauges, etc. Characteristics: annealed max. 250 HB Machinability: 3 (1 = very bad - 10 = good) Chemical composition: D6 C Si Mn P S Cr min. 2.00 0.10 0.30 11.00 max. 2.30 0.40 0.60 0.03 0.03 13.00 Production: Round and Flat Size according to customer's requirement Benefit of sawn cuts: The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting. Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material. This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.