Overview
Product Details
APPLICATIONS: Blanking, stamping, and cold forming dies and punches for long runs; lamination dies Bending, forming, and seaming rolls Cold trimmer dies or rolls Burnishing dies or rolls Plug gages Drawing dies for bars or wire Slitting cutters Lathe centers subject to severe wear Characteristics: soft-annealed max. 250 HB Machinability: 4 (1 = badt - 10 = good) Chemical composition: D3 C Si Mn P S Cr Ni V W min. 2.00 11.00 max. 2.35 0.60 0.60 0.03 0.03 13.50 0.30 1.00 1.00 Production: Round and Flat Size according to customer's requirement Benefit of sawn cuts: The processing with the saw is a mechanical processing of the material, which results in a significantly lower unintended deformation and increased hardness for the existing structure, such as the thermal cutting. Thus, the machined workpiece has a homogeneous structure even at the edge, which does not change in the continuation of the material. This circumstance allows immediate finishing of the workpiece with milling or drilling . So it is not necessary to anneal the material or make a similar operation beforehand.