Overview
Product Details
High Quality Production 7 Layer Corrugated Carton Packing Line Carton Packing Line
Model: WJ150- 1600mm 5Layer Corrugated Carton Production Line:
1.Design speed: 150m/min
2.Normal work speed: 100~120m/min
3.Manufacture width: 1600mm
4.Note: The roll paper which is used to test the production speed should meet following requirements:
*.Grade: Min. B
* Moisture content: 11% ± 1%
*.Face paper: 150~200g/m2
* Liner paper: 150~200g/m2
*.Corrugated paper: 105- 180g/m2
5.Flute profiles: A,B,C,E flute(as per clients request)
6.Electricity: 380V, 50Hz three-phase Four wire type(depend on clients country standard) 7.Equipment Direction:Left or Right transmission will be according to client’s requirements.
Remarks: Buyer supply part:1.Air compressor and glue pipeline2.Main power, electric wire from operate box to main power.3.Water supply, pipeline and barrel.4.Water, electric and gas, main groundsill foundation. 5.Test machine use Raw materials ( paper roll, corn starch, caustic soda, sodium borax) to test machinery6.Machine use oil, lubricate oil and high temperature lubricate oil.7.Installing engineer’s food, hotel and supply enough workers to help installing and test machine. 8.Boiler 4Tons supply by clients.
|
Design speed: 150m/min |
Normal work speed: 100~120m/min |
||
|
No. |
Machine name |
Qty |
Remarks |
|
1 |
Mill roll stand |
5 |
Full hydraulic control, pneumatic control brake, inner expansion chuck, hydraulic station adopt Taiwan product, multiple point tension control. |
|
2 |
Railing and track |
10 |
Include 8m railing and track. |
|
3 |
Pre-heater |
2 |
Diameter 900mm, electric adjusts wrapping angle. Motorized rotary. |
|
4 |
Single facer |
2 |
Corrugating roll diameter 320mm, adopt 48CrMo alloy steel, main bearing adopt Japan NSK brand, gluing part could move out the machine, gluing holder adopt Stainless steel |
|
5 |
Pre-conditioner |
2 |
Diameter 900mm, electric adjust wrapping angle |
|
6 |
Double layer bridge conveyer |
1 |
Frequency adjust wind adsorption, electric correct error |
|
7 |
Triplex pre-heater |
1 |
Diameter 900mm, electric adjust wrapping angle |
|
8 |
Duplex Gluing machine |
1 |
Gluing roll diameter 318mm, figure show gluing details, main bearing adopt NSK brand |
|
9 |
Double facer |
1 |
Heating plants 600mm×18set,surface do treated and chromed, pneumatic tension, hydraulic lift-down, include cotton belt |
|
10 |
Main drive |
1 |
Independent reducer box, gimbal driving. |
|
11 |
NC slitter scorer |
1 |
Changing order time 3-5 seconds,precision +/- 1mm at average speed. |
|
12 |
NC cutoff |
1 |
adopt Germany servo driver |
|
13 |
Stacker |
1 |
Transverse output,automatic counter |
|
15 |
Glue making system |
1 |
Include main pot 1 set, carrier pot 1 set, and storage pot 2set, include glue station pump, single facer glue pump and gluing machine glue pump. Circle supply glue, pipeline provided by customer |
|
16 |
Pneumatic system |
1 |
Include steam-water separator and gas storage pot, pipeline and air-compressor supply by customer. |
|
17 |
Electric system |
1 |
Whole line main motor frequency adjust speed, electric part adopt ABB or Schneider product, Motor and reducer adopts Taiwan Teco product, imported transducer. |
|
18 |
Steam system |
1 |
Adopt imported brand valve and drain valve, pipeline provided by customer |
The Buyer always asks the price from us at the beginning. There are different conditions and stages. Different conditions and stages, different questions and solutions.
Q1. If the buyer also want to make the corrugated cardboard by yourselves, please offer following details to match the right machines for you.1) Capacity/output-----How many pieces cardboards per day? It determs the speed and configurations of this production line.2) How many plies of your cardboard?-----3ply, 5ply or 7ply?3) Cardboard/Paper Roll width----Model selection. (From 1300mm to 2500mm)
Q2. If the buyer only needs to make the cartons as well as the new factory, please offer followingdetails to match the right machines. 1) Capacity?-----Speed, configuration and machine selection.2) The maximum size of the carton you need---Model selection. (L+W)*2+50MM will be the maximum length. You can calculate it by yourselves.3) How many color printing?-----Different printing number, different prices. 4) Do you need to make abnormal/odd shape of carton box? If yes, you need to buy the die-cutting machine. Please also offer the scope of the odd shape case, color printing or not, how many colors and other details.5) Do you still need some supporting machines? Such as thin blade slitter and scorer, gluing machine and stapler, etc.
Q3. If you are the old factory and just want to change some machines, you only need to offer following details: 1) The model selection2) The speed you want3) If need the printing function, please let us know how many color printing you need.
Q4. About WarrantyONE Year. Within one year, any problems caused by our machine's physical issues, we will sendthe spare parts to you for free. You can repair them by those spare parts. You only need to bear the transportation cost. Generally speaking, as long as you use them reasonably, they can work for you well at least 10 years.
Q5. About the after-sale Services. 1) You can send your workers or technicians to China to learn to how to operate the machines.2) We will send our technicians to your country to provide the installation and debugging servies for you. During that, our technicians will teach your workers how to operate them. You need to undertake the round trip airfare, local food, accommodation, transportation and other local cost.Meanwhile, you need to pay USD$80/day for per technician. 3) In the course of the production at your side, if you need our technicians to help you, just follow above points.
Q6. About more services or integrated solutions, please contact us via sales(at)qishengpack.net.For consumables and spare parts, please contact us via sales(at)cartonhome.net.
