Overview
| Warranty | 3 years | Receiver working voltage | 7.4V±1V |
| Transmitter operating voltage | 11.1V±0.5V | Place of Origin | Hubei, China |
| Brand Name | WGDC | Certification | ISO9001, CE, ISO14001 |
| Single package size | 43X36X36 cm | Receiver operating voltage | 7.4V±0.5V |
| Ambient temperature | 23℃±1℃, | Model Number | WD-2134D |
| Working temperature | -10℃~40℃ | Selling Units | Single item |
| Working environment wet | <80% | Power | Electronic |
| Wet environment | 40%~60% | Measured voltage being | 50Hz±1Hz |
| Single gross weight | 5.000 kg | Customized support | ODM, OBM |
| Transmitter working voltage | 11.1V±1.5V | Measured Hz | 45Hz~70Hz |
Product Details
Product Overview
WD-2134D Multi-function cable identification instrument
WD-2134D multifunctional cable identification device, also known as cable identification device, live cable identification device, intelligent cable identification device is designed for power cable engineers and cable workers to solve the technical problems of cable identification. Users can accurately identify one target cable from multiple cables through the instrument to avoid serious accidents caused by missawing live cables. Cable identification starts from the operation at both ends of the cable, it is necessary to ensure that the double numbering at both ends of the cable is accurate, this instrument design uses PSK technology, combined with accurate algorithm. No matter how reliable the memory of field workers is, it is not a substitute for the identification of specialized instruments. This product has the functions of live cable identification, power failure cable identification, AC current testing, AC voltage testing. It is composed of a transmitter, a transmitting current clamp, a receiver, a receiving flexible current clamp, etc.
Products Description
Transmitter: Recognition of electric cable, power cable recognition when transmitting to the target cable, built-in home duty rechargeable lithium-ion batteries, transmitter using special tool box design, integrated with polypropylene plastic as raw materials, add a new composite filling material an injection forming, small density, strength, stiffness, hardness, wearresistance, heat resistance, insulation performance is superior, Its box can withstand about 200kg of pressure, the host large LCD real-time display of the remaining battery, white backlight, transmitting signal dynamic indication, at a glance.Transmitter tongs: when the live cable is identified, the transmitter tongs couple the signal sent by the transmitter to thetarget cable. The size of the tongs is φ 120mm. The transmitter tongs are directional, and the transmitting signal flows in the direction indicated by the arrow on the transmitter tongs.
Receiver: handheld device, 3.5-inch color LCD screen, built-in high-speed microprocessor, combined with accurate algorithm, pulse coding current signal of the transmitter to identify and decode, at the same time with signal strength calibration function, display signal strength and detection results, beautiful and intuitive; Color scale bar dynamic display, clear at a glance, successful identification of cable √, non-target cable ×, can quickly and automatically identify the target cable. At the same time, the measured voltage range is AC 0.00V to 600V(50Hz/60Hz), the measured AC current range is AC 0.00A to 5000A(50Hz/60Hz), and the measured current frequency is 45Hz to 70Hz.
Product Paramenters
Transmitter specifications | Receiver specifications | |||||
Functions | Launch the composite pulse frequency current signal, showing the remaining battery voltage, and a dynamic indication of theemission state | Functions | Cable identification (identify and decode the pulse current signal); AC voltage, current and frequency measurement | |||
Power supply | 11.1V high capacity rechargeable lithium battery, full charge works continuously for about 8 hours | Power supply | 7.4V high capacity rechargeable lithium battery, USB charging port, full charge works continuously for about 6 hours | |||
Display mode | Large LCD displays the remaining battery voltage in real time | Rated current | About 300mA max | |||
Emission frequency | When 625Hz, 1562Hz, 2500Hz, 10KHz(charged identification), press the upper and lower arrow button to adjust the emission frequency | Display mode | The 3.5-inch real color LCD screen display, the color icon indication | |||
Pulse voltage | At 500V(blackout identification) | Signal calibration | Yes, the percentage of the received signal and the transmitted signal, reaching the calibration value above 60%, is one of thesuccessful success conditions. After calibration, the test frequency and signal magnification cannot be changed, otherwisere-calibrated | |||
Pulse current | Maximum 5A (depends on the size of the circuit resistance) | Direction recognition | Yes, the transmitter and receiver pliers must have the same direction as the loading signal to identify one of the successfulconditions | |||
Pulse frequency | One / second | Cable recognition was successful | Green hook icon indicates (√) | |||
Pulse width | 2ms | Non-target cable | Red-Orange Fork icon Indication (×) | |||
Emission clamp inner diameter | φ 120mm | Receiver size | Long & Wide 207mm × 101mm × 45mm | |||
Test line length | 3 m, with a crocodile clip, 1 red and black each | Flexible coil | Approximately 630mm, line diameter is 6 mm or 12.5mm long | |||
Emission clamp lead length | 2m | The inner diameter of the coil | φ 200mm | |||
The size of the grounding needle | Long and wide 225mm × 100mm × 10mm | Lead length | Flexible coil lead length: 2m | |||
Transmitter size | 320mm ×275mm ×145mm | Voltage test line | Long 1m (red and black each) | |||
Emission clamp size | Long and wide 300mm × 175mm × 50mm | Test scope | Power failure identification: the coil can detect the pulse signal where the circuit resistance is 0 Ω~10kΩ; when the detectioncircuit resistance is 10kΩ, the transmitter battery power is more than 11V | |||
LCD size | 128mm×75mm | Live identification: the coil can detect the pulse signal with a circuit resistance of 0 Ω~100 Ω; when the detection circuitresistance is 100 Ω, the transmitter battery power is more than 11V | ||||
LCD displays the domain | 124mm×67mm | Scale | AC Voltage: 0.01V~600V (50H z / 60H z) | |||
The outer package size | Length, width and height are 400mm× 245mm× 335mm | AC current: 0.01A~5000A (50H z / 60H z) | ||||
Backlight control | Yes, white backlights | Current Frequency: 45Hz~70Hz | ||||
Working temperature | -10℃～40℃ | accuracy | AC Voltage: ± 2% ± 1dgt | |||
Storage conditions | -20℃~50℃, ≤ 95%RH, without free | AC current: ± 2% ± 1dgt | ||||
Instrument quality | Transmitter: 2.5kg | Current Frequency: ± 2% ± 1dgt | ||||
Transmitter clamp: 1.08kg | Identify the signal | Colored scale bars and numbers show the signal intensity | ||||
Total quality: 4.4kg(including the receiver) | Detection rate | About 1 / s | ||||
Battery power | When the battery voltage is below 9.65V, the low voltage is displayed to charge the battery; below 9.5V, the device automaticallyturns off | Increased regulation | Under the test interface, adjust the signal magnification by pressing the left and right arrow keys | |||
Charger | 12.6V DC charger | Backlight control | Under the menu interface, press the upper and lower arrow keys to adjust the LCD backbrightness | |||
Charging interface | Round charging interface, DC identification | Automatic shutdown | About 30 minutes after turning on, the instrument is automatically turned off to reduce battery consumption | |||
Anti-pressure | The transmitter is designed with an integrated special kit design which can withstand pressure of about 200kg | Battery voltage | When the battery voltage is below 6.5V, the low voltage is shown to charge the battery | |||
Pressure resistance | Top and bottom of AC 3700V/rms(cabinet) | Charger | 9V DC charger | |||
Electromagnetic properties | IEC61326(EMC) | Charging interface | USB charging interface | |||
Refer to the safety rules | IEC61010-1 (CAT 300V, CAT IV 150V, Pollution Level 2) | Working temperature and humidity | -10℃~40℃; below 80%Rh | |||
Storage temperature and humidity | -10℃~50℃, ≤ 95%RH, without free | |||||
Receiver quality | Receiver: 370g (with battery) | |||||
Flexible current clamp: 172g | ||||||
Our Advantages
1. The company was established in 2011 and is one of the early manufacturers of electric power instrumentation in Hubei.
2. Wugao Electric has always adhered to the sustainable development path of investment, innovation, investment and innovation, from a single product at the start-up stage to a total of 150 products in 14 categories. At present, the serialization, diversification and scale of products have been realized.
3. Wugao Electrical has passed the international quality management system certification (GB/T19001-2008/IS09001: 2008), the occupational health and safety management system certification (GB/T28001-2011/OHSAS 18001: 2007) and the environmental management system certification (GB/ T24001-2004/ISO 14001:2004), the company has the People's Republic of China Manufacturing Measuring Instruments License (CMC Ezhi No. 00000350), and is a member of the Hubei Electric Power Measurement and Testing Association.
4. Wugao Electric continues to develop new products to achieve product upgrades. Through years of accumulation, Wugao Electric has won a number of patented technologies with independent intellectual property rights, and has successively obtained more than a dozen invention patents and utility model patents.
Why Choose Us
Wuhan Wugao Electric Co., Ltd. specializes in the research, manufacturing and sales of high-voltage testing equipment, and was awarded the title of "High-tech Enterprise" by the Wuhan Municipal Science and Technology Commission. The company has strong financial strength, and has a group of high-end scientific research personnel and a production team with rich manufacturing experience. The company has established extensive and close cooperative relations with many well-known experts from Wuhan University, Huazhong University of Science and Technology, and State Grid Electric Power Research Institute. This uninterrupted research and development benefited from continuous improvement and always striding forward to the highest standards.
FAQ
1.Are your products competitive?
We are manufacturers, we can guarantee preferential prices and high quality.
2. When can l get the price?
We usually quole within 6 hours after we get your inquiry. If you are vey urgent to get price, please call us or tell us in your inquiry so that we will deal with your inquiry priority.
3. Whal is your terms of delivery?
We accep EXW,FOB, CFR, CIF, ect. You can choose the one which is the most convience and cost effeclive for you.
4. What if I have difficulty in using the instrument?
We will provide equipment operation manual, operation video and so on. We can also provide training through remote video call.
5. What about the leading time for production?
Honestly,it depends on the order qty and product item. For normal items, goods will be delivered within 3 working days. The transportation time is determined by the logistics company, and the general transportation time is 5-7 days.
6. How to deliver?
For most of our customers, we provide door-to-door service. You only need to go through the import customs clearance procedures and pay the import tariff.
7. How about the packing and will the goods be damaged?
We will do standard export packing for each equipment, so far there has been no damage to the goods.
Trading Area
Global